Breaking News

Easy reprocessing of FFP 2 & FFP 3 masks with Vacuum Pro Series

Dear customers and business partners,

On 23.03.2020, the ÖGSV (Austrian Society for Sterile Goods Supply) published a statement on the current supply situation with FFP 2 and FFP 3 respirators. It is pointed out that reprocessing of these disposable masks is possible under the following guidelines:

"Reprocessing of FFP2 and FFP3 protective masks with or without a valve can, according to current knowledge, be carried out using the following procedures (visibly soiled or damaged masks must not be reprocessed!)

• Steam sterilization at 121 °C / 20 min (134 °C / 5 min is also possible, but this procedure puts more strain on the rubber band, which could be readjusted or replaced if necessary) • Steam sterilization at 105 °C / 5 min (mattress disinfection system or corresponding program in the steam sterilizer)

In principle, EO and FO sterilization methods are also effective, but are not recommended due to the possible residues in the filter material.“ – Statement of the ÖSGV's expert committee on testing

Our autoclaves of the Vacuum Pro Series 12 - 22 liters can be adjusted to the corresponding parameters and can be used for the reprocessing of FFP 2 & FFP 3 masks.

Click t1p.de/gxz6 for further information on our products.

Vacuum Pro 12 Liter Article number: 8500487

Vacuum Pro 22 Liter Article number: 8500489

If you have any questions about our devices or the necessary settings, please do not hesitate to contact us. You can reach us daily during our normal opening hours at +43 732 674 278 or via e-mail at support@certoclav.com.

Here you will find the sources for information from the ÖGSV as well as the decree, from the Federal Ministry of Labor, Family and Youth, regarding the reprocessing of FFP 2 & FFP 3 masks:

Source:

t1p.de/5j2e – Austrian Society for sterile goods supply
t1p.de/ylj1 – Federal Ministry of Labor, Family and Youth<p/>


  • CertoClav Vacuum Professional SeriesThe fast All-In-One autoclaveFlexible media sensorThomas vacuum pump

    CertoClav Vacuum Professional Series




    The fast All-In-One autoclave

    Flexible media sensor

    Thomas vacuum pump

  • Store protocolsManage your autoclavesCreate programsReview protocol historySecure








    Store protocols

    Manage your autoclaves

    Create programs

    Review protocol history

    Secure

  • CertoClav ClassicSterilisation up to 140°CPrecision valve controlTimer

    CertoClav Classic




    Sterilisation up to 140°C

    Precision valve control

    Timer

  • MultiControl 2 TouchProgrammable autoclaveWiFi + Cloud connectionTouch screen interface

    MultiControl 2 Touch




    Programmable autoclave

    WiFi + Cloud connection

    Touch screen interface

  • CertoClav ConnectFully automatic autoclaveProgrammableMedia Sensor optial

    CertoClav Connect




    Fully automatic autoclave

    Programmable

    Media Sensor optial


CertoClav Vacuum Pro 45

The all-in-one autoclave

Fast, Vacuum technology, media sensor. The laboratory autoclave of CertoClavVacuum-Pro 45 is available with a chamber volume of 45 liters. Pre-heatable chamber, cooling-ventilation and vacuum pump guarantees fast cycles from 20 minutes. Flexible media temperature sensor for professional sterilization of liquids included. Integrated water containers for fresh and waste water. Including free CertoCloud Software for remote autoclave management, data backup, alert system via SMS and email. more

CertoClav Vacuum Pro Series

The all-in-one autoclave

Fast, Vacuum technology, media sensor. The laboratory autoclaves of CertoClav-Vacuum-Professional-Series are available with a chamber volume of 12 liters, 18 liters or 22 liters. Pre-heatable chamber, cooling-ventilation and vacuum pump guarantees fast cycles from 20 minutes. Flexible media temperature sensor for professional sterilization of liquids included. Integrated water containers for fresh and waste water. Optional fixed water connection and R/O-System for automatic water refill. Including free CertoCloud Software for remote autoclave management, data backup, alert system via SMS and email. more

Certoclav Classic

Sterilisation up to 140°C, the trusted construction since 50 years

Autoclave for sterilisation at 125°C or 140°C.

Venting by stream process.

Manual process timing with integrated timer.

Process control by thermostat and precision valve.

18 liter volume.    

 

 

Certoclav
MultiControl 2

The electronic autoclave with stainless steel chamber

Electronic autoclave room temperature to 140°C. Several programms preinstalled.

Controller unit has a printer port for the CertoClav receipt printer and a USB port for PC connection.

Basic version of PC software for data monitoring included (professional license required for advanced programming functions).    

 

 

Certoclav Multicontrol 2 Touch

Autoclave with touch screen and cloud connection

Autoclave with 7 inch high Res touch screen with intuitive controls. Connected to CertoCloud for process data management. Freely programmable from room temperature to 140°C. No addtional software required. Controller unit with printer port and USB port for connection to a PC.    

 

 

CertoClav Connect

Fully automatic autoclave with cloud connection

Fully automatic laboratory autoclave with 7 inch high-res touch screen and intuitive user interface.

All user tasks are explained with videos on the machine.

Virtually no training requirements for new users.

Easy compliance with GLP documentation requirements possible via CertoCloud    

Media sensor optionally possible

 

 

Pyrogens and Bacterial Endotoxins

Endotoxin (lipopolysaccharide) are pyrogenic (cause fever), and are more difficult to remove the bacterial cells.

[more]

Prions

The prion protein responsible for transmissible spongiform encephalopathies (TSEs) can be denatured by autoclaving.

[more]

50 years of experience in autoclave construction

Get to know a pioneer of autoclave constructionmore

Find out more about CertoClav

We have made ​​our choice!

This compact autoclave is ideal for our pharmacy... more

Materials testing with CertoClav autoclave

Simple implementation of HAST tests, ICP-TM 650, and many more... more

How is materials testing carried out using the CertoClav?

Language Selection 

Deutsch
English
Français
Español
Italiano
Polski
Türkçe

We are at your service

Give us a call at +43 7229 6890 (German/English) or email us: support@certoclav.com