Skip to content
Find a dealer

CertoClav MultiControl 2

The next generation of the MultiControl controller, in stainless steel.

  • Laboratory waste
  • Culture media
CertoClav MultiControl 2 laboratory autoclave
Volume
18 L
Temperature
20 – 140 °C, adjustable
Chamber
Stainless steel 316L
Weight
9,5 kg

About this model

CertoClav MultiControl 2 is the next generation of the proven MultiControl autoclave controller. With MultiControl, the autoclave can be programmed freely. Standard sterilisation programms are pre installed.

Full description from the catalogue

There is a USB connection and a RS232 printer port. PC Software for visualisation of process data is included. (Pro License is required to for programming of multi-step programms. Wide palette of application areas: Sterilisation, culture medium preparation, material testing (ICP-TM 610, HAST Test, GLB-AL 631). Long term cycles are possible without problems. Freely selectable temperature from room temperature up to 140° C (up to 2.7 bar / 39.2 psi gauge pressure). Automatic process cycle and independent malfunction detection. Progress indicator Applications: Compact instruments also simply packaged, liquids (culture mediums), bottles and equipment, refuse sterilisation. Materials testing (ICP-TM 610, HAST, GLB-AL 631). Long time cycles possible. Important features: microprocessor-controlled Electronic process control PT100 temperature sensor Time and temperature individually editable control unit with LCD display Automatic venting in fractional flow process RS232 connection, USB Heating integrated in the base

Intended loads

Laboratory waste

Contaminated cultures, plates and disposables, reliably inactivated.

Culture media

Agar and broth sterilised without boiling over or scorching.

Available versions

  • 18 L · programmableArt. 8510175

Prices on request. Your local dealer handles installation and the annual inspection.

What goes into the chamber.

Examples from the round wire basket that goes into this chamber.

  • Culture media in bottles

    Culture media in bottles

  • Plastics and rubber

    Plastics and rubber

  • Organic materials

    Organic materials

  • Laboratory waste from the S2 area

    Laboratory waste from the S2 area

  • Laboratory waste in disposal bags

    Laboratory waste in disposal bags

    Waste in bags needs a long hold. One hour is the recommendation here. A vacuum autoclave does the same load in four minutes.

  • Contaminated cultures and disposables

    Contaminated cultures and disposables

  • Material and resistance testing

    Material and resistance testing

  • H.A.S.T stress test

    H.A.S.T stress test

    Holding times of up to three months, what the H.A.S.T test needs.

Sealed bottles

  • Crimped or tightly closed glass bottles up to 40 ml: every autoclave.
  • Above 40 ml, support pressure is required.
  • Plastic bottles, closed or crimped, always need support pressure, whatever the volume.
  • Only the VacPro 45 L offers support pressure (ordering option 8500613).

What this model is released for

Straight from the CertoClav catalogue and price list. If something is not listed here, it is not listed there either. Ask us rather than assume.

Sterilisation of

  • Unwrapped solids without hollow bodies
  • Liquids
  • Bottles
  • Instruments
  • Plastics
  • Rubber (105 °C)

Preparation of

  • Culture media and agar

Waste disposal

  • Sterilisation of waste
  • Waste in disposal bags
  • Biological hazardous material (S2)

Testing and cycles

  • Material testing
  • Long cycles, up to 7 days

Function

  • Digital documentation
  • Programmable

Equipment and connection

  • Standalone, no plumbing needed
  • Single-phase socket, no three-phase supply

CE marked. Conforms to 2014/35/EU, 2014/30/EU, 2011/65/EU.

Technical data

Chamber volume
18 L
Chamber diameter
26 cm
Chamber depth
35 cm
Chamber material
Stainless steel 316L
Max. operating pressure
2.7 bar
Temperature
20 – 140 °C, adjustable
Heating power
1300 W
Electrical supply
230 V, 50/60 Hz
Net weight
9,5 kg
Dimensions (W × D × H)
44.5 × 30 × 53.5 cm
Orientation
Vertical, top loading
Fractionated vacuum
No
Flexible media probe
No
Drying phase
No
Interfaces
USB, RS232 printer port
Country of origin
Austria

Figures apply to article 8510175. Other versions may differ.

Loading capacity

How many laboratory bottles fit in one cycle, and which carriers the chamber takes, measured by CertoClav with DURAN® bottles.

Stainless steel series 18 L

Articles 8510184, 8510174, 8510175, 8510176

Chamber Ø
260 mm
Chamber height
330 mm
Effective height
290 mm
  • Chamber

    Chamber

  • Instrument tray

    Instrument trayArt. 1300155

  • Wire basket

    Wire basketArt. 1300149

Load carriers

ItemArticleHeightØQty
Instrument tray1300155412501
Wire basket13001492502501

Dimensions in mm.

Laboratory bottles per load

BottleVolumeHeightØBottles
DURAN® Original GL 452000 ml2651361
DURAN® GLS 802000 ml2481361
DURAN® Original GL 451000 ml2301014
DURAN® GLS 801000 ml2181014
DURAN® Original GL 45500 ml181845
DURAN® Youtility500 ml193785
DURAN® GLS 80500 ml1481014
DURAN® Original GL 45250 ml143709
DURAN® Youtility250 ml158669
DURAN® GLS 80250 ml105954
DURAN® Youtility125 ml1245512
DURAN® Original GL 45100 ml1055612

Source: CertoClav loading capacity sheet, 2022-02. DURAN® is a trademark of DWK Life Sciences.

The original sheet as PDF: Loading capacity: Stainless steel, vertical

CertoClav MultiControl 2en

See it run

The video opens at YouTube only when you press play. Nothing is loaded from there before that.

Is the CertoClav MultiControl 2 the right size for your load?

Send us your typical batch: vessel type, volume, frequency. We will confirm it or point you to the model that fits better.

Ask for a dealer quote
DatasheetFind a dealer