
Neo 18
The standard chamber for a practice that runs several cycles a day.
CertoAssist on-screen batch release with CertoSign
- Cycle time
- approx. 38 min incl. drying
- Capacity
- approx. 36 pouches
- Chamber
- Ø 25 × 35 cm
- List price
- €10,955 excl. VAT
Products
Laboratory Autoclaves
All laboratory autoclavesVertical, top loading
CertoClav EL12 L
CertoClav Classic18 L
CertoClav Connect18 LHorizontal, fractionated vacuum
CertoClav VacPro 1212 L
CertoClav VacPro 2222 L
CertoClav VacPro 4545 LAccessories
Baskets, plates and trays
Sensors
Documentation and licences
CertoCloud
Water treatmentWear parts and service setsMedical Autoclaves
All medical autoclavesClass B autoclaves
CertoClav Neo 18LFSS18AA
CertoClav Neo 23LFSS23AA
CertoClav Neo 45STE45TAccessories
Sterilisation containers6 sizes
Base plates3 sizes
Filters
CertoAssist
ClavioSoft
Water treatment18, 23 and 45 litres. Batch release right at the device.
Designed with love in Austria

The chamber size is not a question of ambition. It is a question of how many pouches leave your treatment rooms between opening and closing.

The standard chamber for a practice that runs several cycles a day.
CertoAssist on-screen batch release with CertoSign

The deep chamber for long instruments and high throughput.
CertoAssist on-screen batch release with CertoSign

Clinic capacity: a 61-centimetre chamber and trays half a metre long.
CertoAssist on-screen batch release with CertoSign
Included with every class B autoclave


CertoAssist terminal with a 7-inch touch display.

Can be connected to your practice software (RS232).

Tray rack and a handle for taking trays out safely.


Connections for a label printer and a barcode scanner.

Documentation through the terminal and via USB, on paper only if you want it.
Delivery, installation and initial validation through your dealer.
Installed and validated by your dealer.
Expert advice, wherever you are.
Handpieces, turbines and wrapped instrument trays.
Surgical instruments and everything that goes back into a patient.
Mixed loads, high throughput, long days.
Frequent small batches with short turnaround.
Wrapped instruments with documented release.
Where hygiene documentation is inspected too.
Our partners quote, install, commission and repair locally, in your language, under your country's rules.
That is why there are no prices here: machine, basket, probe, installation and inspection are one figure, and your dealer quotes it.
4medica Ltd.
Sofia, Bulgaria
Scientific Supplies GmbH
Essen, Germany
Grosshandel Herrmann GmbH
Herzogenrath, Germany
Dentalservice Osterloh
Hohenwarthe, Germany
Medizintechnik & Sanitätshaus Harald Kröger GmbH
Massen-Niederlausitz, Germany
DANMEDICS Medical Engineering GmbH
Münster, Germany
schubamed - Medizintechnik
Schwandorf, Germany
VITECH SHPK
Prishtine, Kosovo
Skirgesa UAB
Kaunas, Lithuania
Icona Ltd.
Palmerston North, New Zealand
Wikuma GmbH
Hallwil, Switzerland
Rivieradent SARL
Montreux, Switzerland
No partner in your region yet? Write to us, we will handle it directly.
Consumables, accessories and the parts that decide whether a cycle works.

CertoAssist terminal, label printer, barcode scanner and thermal labels.

Distillers and reverse osmosis systems for feed water that meets EN 13060.

Sealing devices, pouches and rolls for wrapped loads.
Steam indicators, Helix and Bowie & Dick test packs for routine testing.

Stainless steel trays, holders and sterilisation containers.
Door seals, bacteria filters and service sets.
Pouches per day and your longest instrument. We answer, and pass your enquiry to your dealer.
Advice · quotations · service coordination
Class B to EN 13060 is the only small steriliser class qualified for all three difficult load types at once: wrapped goods, hollow bodies and porous materials. It is achieved with fractionated pre-vacuum, which removes trapped air before steam is admitted, followed by a controlled drying phase.
Included. Every CertoClav class B autoclave ships with the CertoAssist terminal. The same chamber sold without it documents to a USB stick and leaves the batch release to a clipboard. That is the whole difference between the configurations.
Count the pouches that leave your treatment rooms on a normal day, and measure your longest instrument. The 18 litre chamber takes roughly 36 pouches per cycle, the 23 litre roughly 46 with a deeper chamber for longer instruments, and the 45 litre is sized for clinics and central reprocessing.
CertoAssist releases, labels and archives each batch at the device, and the cycle can be exported in an EN 13060 compliant format. For hygiene documentation across the whole practice (cleaning, disinfection, packaging, training records), it pairs with ClavioSoft. The routine tests (vacuum, Helix and Bowie-Dick) run as programmes on the device and are documented digitally too.
Not with CertoAssist. It runs on the terminal at the autoclave and needs no cloud account and no server in the back office. That matters in practices with their own data protection requirements.
Reprocessing medical devices is subject to national requirements that normally include periodic validation. We can carry out factory validation, and independent validation service providers cover on-site work. Your dealer will tell you what applies in your country.
CertoClav is the manufacturer brand and sells through specialist dealers who quote with installation, validation and a service agreement for your country. Ask us and we will point you to the partner nearest you.
Inspection and maintenance packages, factory validation and repair are available for every model. See the service page for what each package covers and its article number.
Tell us your region and the segments you serve: dental, medical, veterinary, podiatry, cosmetic. We will tell you whether the territory is open and what a partnership involves.